- THREE GROUPS OF SANDING UNITS CAN SAND PANELS WITH CURVED SURFACES IN DIFFERENT DIRECTIONS AND DIFFERENT HEIGHT, THAT CAN ACHIEVE THE BEST SANDING EFFECT
- EACH SANDING UNIT HAS 2 ROWS, WHICH CAN ROTATE IN TWO DIFFERENT DIRECTIONS
- HORIZONTAL ROLLER IS USED TO SANDING HORIZONTAL GROOVES IN PANELS, SANDING DISK IS USED TO SANDING PANELS SURFACE AND SHARP EDGES AND CORNERS
- 2 SANDING ROLLERS, USED TO SANDING PANELS SURFACE AND VERTICAL GROOVES
- EACH SANDING SHAFT CAN SWING SEPARATELY, IT IS USED TO SANDING THE SANDING MARKS CAUSED IN WORK. IT CAN MAKE PANEL SURFACE MORE SMOOTH AND CLEAN
- SANDING UNIT CAN BE PULLED OUT AS A WHOLE PART FROM 2 SIDES OF THE MACHINE, IT IS CONVENIENT TO CHANGE SANDING PAPER
| Model | RMS1000R6H | RMS1300R6H |
| Working width | 20-1000mm | 20-1300mm |
| Working thickness | 2-110mm | 2-110mm |
| Working length | ≥400mm | ≥400mm |
| Feed speed | 2.5-12.5m/min | 2.5-12.5m/min |
| Number of polishing roller | 8 lateral +10 disc+ 2 roller | 10 lateral +12 disc+ 2 roller |
| Total motor power | 12.85kw | 18.75kw |
| Swing scope | 50/30/15mm | 50/30/15mm |
| Speed of sucked air | ≥25m/s | ≥25m/s |
| Working air pressure | ≥0.5Mpa | ≥0.5Mpa |
| Sanding belt | 180/240/320 mesh(paper tape) for MDF, 320/400/600 mesh(cloth tape) for lacquer |
180/240/320 mesh(paper tape) for MDF, 320/400/600 mesh(cloth tape) for lacquer |
| Overall dimensions | 3600*1950*1800mm | 3600*2250*1800mm |
